Epson DFX-9000 Repair Manual page 27

Epson DFX-9000 Field Repair Guide
3. With the Mechanism tilted forward, remove the Tilt Bar, located in the right rear corner of the lower housing.
4. Insert the top of the Tilt Bar into the Rubber Grommet on the right side of Mechanism and the bottom of the
Tilt Bar into the Lower Housing as shown below. This will keep Mechanism tilted forward.
Component Replacement
Tilt Bar
Right Rear Corner of Printer
Printer Component, Software Item,
Place bottom of
Tilt Bar here
Place
Place bottom of
Tilt Bar in the
small square area
LCD Display, Printer Button
3/29/07
Page 18.