No Initialization, Control Panel Led's Are Lit; No Initialization Unless I/O Cable Removed; No Print (No Self-Test And No Printing From Host Computer) - Epson DFX-9000 Repair Manual

Epson DFX-9000 Field Repair Guide

No initialization, Control Panel LED's are lit

Action:
1. Verify that the Top Cover is closed.
2. Check, and if necessary replace the CO SW Assy (Cover Open Switch Assy).
3. Check, and if necessary replace the OP Cable and connections.
4. Replace the OP Unit.
5. Initialize and if necessary replace the ROM Board.

No initialization unless I/O Cable removed

Action:
1. Replace the data cable.
2. Check the host computer interface for failure.

No print (No Self-Test and No Printing from Host Computer)

Action:
1. Verify that the Top Cover is closed.
2. Check the Pause LED. If it is lit, press the Pause button.
3. Replace the ROM Board.
4. Verify that the Carrier Cable Unit is correctly connected to the Print Head and ROM Board.
5. Replace the ROM Board.
Troubleshooting Printer Component, Software Item, LCD Display, Printer Button
3/29/07
Page 133.