Ricoh PE-P4 Field Service Manual page 140

5. System Maintenance Reference
RX Settings
TX Settings
Overseas Comm
Mode Settings
138
Pressing the Stop/Clear key can stop the current
receiving operation. Received data is lost.
Stop/Clear key
[No Functional (Default)/ Functional]
DFU (Designed for Factory Use)
Off-Hook Level Do not change this setting.
[10V (Default)/ 15V/ 20V/ 25V]
Sets the Off-Hook detection period.
Off-Hook Detection
200 ms (default)
Period
800 ms
-
Number for
Remote Switch
[0 to 9 / - / 1step]
-
Number of time to
press
[1 to 3 / - / 1step]
-
Period for TEL to
FAX
[Limitless / 10 sec / 20 sec / 30 sec/ 40 sec]
Sets the redial interval when Tx fails.
Redial Interval
[5 Min/ 6 Min]
Sets the number of redials when Tx fails.
Redialings
[2 times/ 3 Times/ 4 Times/ 5 Times]
This sets the machine to ignore a DIS signal sent from the
Overseas Comm
called station once in a sending operation.
Mode
[Off (Default)/ Ignore DIS Once]
If this setting is set to "On", the machine detects the CNG
signal after the line is connected. If it is set to "Off", the
Minimum Time
machine detects the CNG signal as long as the line is
Length
connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]