5. System Maintenance Reference
Init Engine
EEPROM
Model
Brand ID
Maintenance ID
LSU Adjustment
Trans. Belt Adjust
Fuser SC Detect
Color Registration
Reset Transfer Unit
Reset Fuser Unit
Fuser SC Reset
Reset 2nd Transfer
unit
134
This clears all counters except "Full Color" and "Black and White" in the total
counter.
When you execute "Init Engine EEPROM", the engine EEPROM is initialized.
Turn the machine power off/on after you change this setting.
DFU (Designed for Factory Use)
Do not change this setting.
Displays only
Displays the current model in a dropdown list.
DFU (Designed for Factory Use)
Do not change this setting.
00* – 7F
Displays the current brand ID number.
DFU (Designed for Factory Use)
Do not change this setting.
00* – 7F
Displays the current maintenance ID number.
Character: alphanumeric "0-9", "a-f", "A-F", only valid
Input 160 bytes
data can be input.
setting.
Input length: 160 bytes
When you execute "Trans. Belt Adjust", the transfer belt adjustment is done. This
calibrates the motor speed to match the length of the new transfer belt.
If On, the engine detects SC559. If Off, the engine does
On/Off*
not detect "Fusing SC Reset".
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.
Resets the transfer unit life counter.
Resets the fusing unit life counter.
Resets the Fusing related SC.
Resets the 2nd transfer unit (transfer roller) life counter.