Ricoh PE-P4 Field Service Manual page 143

Equalizer
Redialing
V34 Settings
First TX Speed
Symbol Rate
Disable/Enable
Internet Fax
Function
Reply-To Setting
(only for :M204)
Prt Rec Txt Mail
Header
These selectors set the equalizer's training level to be
applied if training fails due to poor line connection.
[Automatic (Default)/ 4 Point/ 16 Point]
Resend when a communication error occurs.
[Disabled (Default)/ Not Disabled]
Sets the first transmission speed choice, before fallback.
[2400 Bps/ 4800 Bps/ 7200 Bps/ 9600 Bps
/ 12000 Bps/ 14400 Bps/ 16800 Bps/ 19200 Bps/
21600 Bps/ 24000 Bps/ 26400 Bps/ 28800 Bps/
31200 Bps/ 33600 Bps (Default)]
This setting limits the transmission speed range in V.34
mode by masking the desired symbol rate(s).
[Not Used (Default)/ 3429 Sym/Sec
/ 3200 Sym/Sec/ 3000 Sym/Sec
/ 2800 Sym/Sec/ 2400 Sym/Sec]
Decides whether the Internet Fax function is used or not.
Default: Enabled
Sets "Reply-To" in the SMTP authentication.
Yes: Sets the e-mail address that is usually set in the
"From" field in the "Reply-To" field, and sets the
"Administrator e-mail Address" in the "From" field.
No: Not set.
Default: No
Selects whether or not to print the header part of E-mail.
Default: No
Service Menu
141