Ricoh PE-P4 Field Service Manual page 137

DFU (Designed for Factory Use)
Special Mode
Do not change this setting.
Tentative Density
Economy Color
Print
Conversion
Mode
Sets whether to display the PM parts replacement notice and whether to stop
the engine.
0
PM Parts Rep
1
Notice
2 (default)
3
Scan Maintenance
Sets the monochrome compression type for scanning.
Mono Compression
MH (Default)/ MR/ MMR
Sets the tentative density of each mode.
Text: 100 / 50 / 30 (Default: 100)
Image: 100 / 50 / 30 (Default: 50)
Graphic:100 / 50 / 30 (Default: 30)
Sets the conversion mode for the economy color print.
No: No conversion is executed.
Color Up Mode: Converts into economy color. The image
density is decreased.
B&W Up Mode: Converts into Economy Black and white.
At near end: No Notice / Not Stopped
At life end: Notice "Replace Now" / Not Stopped
At near end: No Notice / Not Stopped
At life end: No Notice / Not Stopped
At near end: Notice / Not Stopped
At life end: Notice "Replace Now" / Not Stopped
At near end: Notice "Replace Soon" / Not Stopped
At life end: Notice "Replace Now" / Stopped
Service Menu
135