• The default setting is "OFF". Select "ON" only if the customer wants to use this feature.
17. Select "Registration", and then adjust the registration for each direction (vertical and horizontal
direction) and tray if necessary.
18. Select "2nd Transfer Fuser Temp", and then adjust the transfer roller bias and the temperature
reduction of the fusing unit for each paper type and for the front and back sides. The default
settings for normal operation are all '0'.
19. Perform "Color Registration" in the "Engine Maintenance" menu.
20. Turn the power off and on.
• MUSIC will be performed automatically.
21. Print out the test chart (page 53 "Laser Optics Housing Unit"), and make sure that MUSIC was
performed successfully.
• If MUSIC is not performed successfully, see "If MUSIC has not been performed successfully"
(page 53 "Laser Optics Housing Unit").
22. If necessary, adjust the registration settings for the front and rear sides of each paper tray in the
"Engine Maintenance" menu.
23. Exit "Engine Maintenance".
Electrical Components
127