Figure 18: UCM6100 Using 802.1X as Client
Figure 19: UCM6100 Using 802.1X EAP-MD5
The following table shows the configuration parameters for 802.1X on UCM6100. Identity and MD5
password are required for authentication, which should be provided by the network administrator obtained
from the RADIUS server. If "EAP-TLS" or "EAP-PEAPv0/MSCHAPv2" is used as the 802.1X mode, users
will also need upload 802.1X CA Certificate and 802.1X Client Certificate, which should be also generated
from the RADIUS server.
P a g e
59
|
UCM6100 Series User Manual