Auto Provisioning Settings; Figure 62: Zero Config Configuration Architecture For End Point Device - Grandstream Networks UCM6100 Series User Manual

Figure 62: Zero Config Configuration Architecture for End Point Device

The configuration options in model layer and device layer have all the option in global layers already, i.e.,
the options in global layer is a subset of the options in model layer and device layer. If an option is set in all
three layers with different values, the highest layer value will override the value in lower layer. For example,
if the user selects English for Language setting in Global Policy and Spanish for Language setting in Default
Model Template, the language setting on the device to be provisioned will use Spanish as model layer has
higher priority than global layer. To sum up, configurations in higher layer will always override the
configurations for the same options/fields in the lower layer when presented at the same time.
After understanding the zero config configuration architecture, users could configure the available options
for end point devices to be provisioned by the UCM6100 by going through the three layers. This
configuration architecture allows users to set up and manage the Grandstream end point devices in the
same LAN area in a centralized way.

Auto Provisioning Settings

By default, the Zero Config feature is enabled on the UCM6100 for auto provisioning. Three methods of
auto provisioning are used.
P a g e 99
|
UCM6100 Series User Manual