Table 6: Ucm6510 Network Settings->802.1X - Grandstream Networks UCM6510 User Manual

LAN 1 / LAN 2 (when Method is set to "Dual")
Default Interface
IP Method
Gateway IP
IP Address
Subnet Mask
DNS Server 1
DNS Server 2
User Name
Password
Layer 2 QoS
802.1Q/VLAN Tag
Layer 2 QoS 802.1p
Priority Value
802.1X
802.1X Mode
Identity
MD5 Password
802.1X Certificate
802.1X Client
Certificate
Firmware Version 1.0.0.5
If "Dual" is selected as "Method", users will need assign the default interface to
be LAN 1 (mapped to UCM6510 WAN port) or LAN 2 (mapped to UCM6510 LAN
port) and then configure network settings for LAN 1/LAN 2. The default interface
is LAN 2.
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the gateway IP address for static IP settings when the port is assigned as
default interface. The default setting is 0.0.0.0.
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the subnet mask address for static IP settings. The default setting is
255.255.0.0.
Enter the DNS server 1 address for static IP settings. The default setting is
0.0.0.0.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
Assign the VLAN tag of the layer 2 QoS packets for LAN port. The default value
is 0.
Assign the priority value of the layer 2 QoS packets for LAN port. The default
value is 0.
Table 6: UCM6510 Network Settings->802.1X
Select 802.1X mode. The default setting is "Disable". The supported 802.1X
mode are:

EAP-MD5

EAP-TLS

EAP-PEAPv0/MSCHAPv2
Enter 802.1X mode identity information.
Enter 802.1X mode MD5 password information.
Select 802.1X certificate from local PC and then upload.
Select 802.1X client certificate from local PC and then upload.
UCM6510 IP PBX User Manual Page 29 of 192