The following table shows the configuration parameters for 802.1X on UCM6510. Identity and MD5
password are required for authentication, which should be provided by the network administrator obtained
from the RADIUS server. If "EAP-TLS" or "EAP-PEAPv0/MSCHAPv2" is used as the 802.1X mode, users
will also need upload 802.1X CA Certificate and 802.1X Client Certificate, which should be also generated
from the RADIUS server.
Select 802.1X mode. The default setting is "Disable". The supported 802.1X mode
are:
802.1X Mode
Figure 27: UCM6510 Using 802.1X as Client
Figure 28: UCM6510 Using 802.1X EAP-MD5
Table 9: UCM6510 Network Settings->802.1X
EAP-MD5
EAP-TLS
EAP-PEAPv0/MSCHAPv2
UCM6510 IP PBX User Manual
P a g e
|
61