Change Log; Firmware Version 1.0.14.23; Firmware Version 1.0.14.21; Firmware Version 1.0.13.14 - Grandstream Networks UCM6100 Series User Manual

This section documents significant changes from previous versions of the UCM6100 user manuals. Only
major new features or major document updates are listed here. Minor updates for corrections or editing are
not documented here.

Firmware Version 1.0.14.23

•
Restored ability to view voicemail count in the Extension/Trunk overview. [Extension Voicemail Count]
•
Restored the ability to set custom numbers for call forwarding settings. [Call Forward Unconditional]
[Call Forward No Answer] [Call Forward Busy]
•
Restored previous format for entering multiple dial plans (one pattern per line) for inbound/outbound
rules. [Pattern] [Pattern]
•
Restored Zero Config's sorting by column and introduced a search bar. [Managing discovered devices]

Firmware Version 1.0.14.21

•
A new web GUI with consistent operating style, can display/update the system's status in real time.
•
Added support for SIP Presence. [PRESENCE]
•
Added support for CallCenter feature/ Virtual Call Queue. [Call Center Settings & Enhancement]
•
Added support for Call Queue position announcement. [Call Center Settings & Enhancement]
•
Added support for Call Queue Statistics. [Queue Statistics]
•
Added support for Call Queue Auto-Fill. [Queue Auto fill enhancement]
•
Added Switchboard for call queue monitoring. [Switchboard]
•
Added ability to restore blind transfer call to transferrer. [Allow callback when blind transfer fails]
•
Added support for external disk cleaner. [Cleaner]
•
Added option to enable DOD when call is being diverted/forwarded. [Use callee DOD on FWD or Ring
Simultaneously]
•
Change follow me settings to extension level settings. [FOLLOW ME]
•
Added support for call forward whitelist. [FWD Whitelist]
•
Added Fail2Ban defense from web login attack. [Login Attack Defense]
•
Added limitation for maximum number of call queue static agents. [Static Agents limitation]
•
Added Support for wakeup service module in Custom privilege. [Custom Privilege]
•
Added IPv6 support for T.38.
•
Added DAHDI settings. [DAHDI Settings]
•
Added ability to pass through SIP Call-Info header to support GXP phone JPEG_Over_HTTP with
encryption and authentication to open door for GDS3710. [Transparent Call-Info header]

Firmware Version 1.0.13.14

•
Added extension whitelist/blacklist for IVR dialing. [IVR]
•
Added ability to include DOD in PPI Header for SIP trunk. [Use DOD in PPI]

CHANGE LOG

UCM6100 Series User Manual
P a g e 23
|