Figure 12: Ucm6102 Network Interface Method: Route - Grandstream Networks UCM6100 Series User Manual

User Name Enter the user name to connect via PPPoE.
Password Enter the password to connect via PPPoE.
Layer 2 QoS Assign the VLAN tag of the layer 2 QoS packets for LAN port.
802.1Q/VLAN Tag The default value is 0.
Layer 2 QoS 802.1p Assign the priority value of the layer 2 QoS packets for LAN port.
Priority Value The default value is 0.
IPv6 Address
IP Method Select Auto or Static. The default setting is Auto
IP Address Enter the IP address for static IP settings.
IP Prefixlen Enter the Prefix length for static settings. Default is 64
DNS Server 1 Enter the DNS server 1 address for static settings.
DNS Server 2 Enter the DNS server 2 address for static settings.
•
Method: Route
When the UCM6102 has method set to Route in network settings, WAN port interface is used for uplink
connection and LAN port interface is used as a router. Please see a sample diagram below.

Figure 12: UCM6102 Network Interface Method: Route

UCM6100 Series User Manual
P a g e 55
|