The following table shows the configuration parameters for 802.1X on UCM6200. Identity and MD5
password are required for authentication, which should be provided by the network administrator obtained
from the RADIUS server. If "EAP-TLS" or "EAP-PEAPv0/MSCHAPv2" is used as the 802.1X mode, users
will also need to upload 802.1X CA Certificate and 802.1X Client Certificate, which should be also generated
from the RADIUS server.
Select 802.1X mode. The default setting is "Disable". The supported 802.1X mode
are:
802.1X Mode
Identity
Enter 802.1X mode identity information.
MD5 Password
Enter 802.1X mode MD5 password information.
Figure 27: UCM6200 Using 802.1X as Client
Figure 28: UCM6200 Using 802.1X EAP-MD5
Table 10: UCM6200 Network Settings->802.1X
EAP-MD5
EAP-TLS
EAP-PEAPv0/MSCHAPv2
UMC6200 Series User Manual
P a g e
|
51