Figure 25: Ucm6510 Using 802.1X As Client; Figure 26: Ucm6510 Using 802.1X Eap-Md5 - Grandstream Networks UCM6510 User Manual

The following diagram and figure show UCM6510 uses 802.1X mode "EAP-MD5" on WAN port as client in
the network to access Internet.

Figure 25: UCM6510 Using 802.1X as Client

Figure 26: UCM6510 Using 802.1X EAP-MD5

The following table shows the configuration parameters for 802.1X on UCM6510. Identity and MD5
password are required for authentication, which should be provided by the network administrator obtained
from the RADIUS server. If "EAP-TLS" or "EAP-PEAPv0/MSCHAPv2" is used as the 802.1X mode, users
will also need upload 802.1X CA Certificate and 802.1X Client Certificate, which should be also generated
from the RADIUS server.
P a g e | 61
UCM6510 IP PBX User Manual