Rohs; Other Approvals; Emc And Environmental Type Tests - Siemens RUGGEDCOM RMC40 Installation Manual

RUGGEDCOM RMC40
Installation Guide
• CAN ICES-3 (A)/NMB-3 (A)
Section 6.1.6

RoHS

This device is declared by Siemens Canada Ltd to meet the requirements of the following RoHS (Restriction of
Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic
equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at
view/109738831.
Section 6.1.7

Other Approvals

This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
• IEC 61850-3
Communications Networks and Systems for Power Utility Automation – Part 3: General Requirements
Section 6.2

EMC and Environmental Type Tests

The RUGGEDCOM RMC40 has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
Test
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
RoHS
Description
ESD
Radiated RFI
Burst (Fast Transient)
Surge
https://support.industry.siemens.com/cs/ww/en/
Enclosure Contact
Enclosure Air
Enclosure Ports
Signal Ports
DC Power Ports
AC Power Ports
Earth
Ground Ports
Signal Ports ± 4 kV Line-to-Earth,
Test Levels
± 8 kV
± 15 kV
20 V/m
± 4 kV @ 2.5 kHz
± 4 kV
± 4 kV
± 4 kV
± 2 kV Line-to-Line
Chapter 6
Certification
Severity Levels
4
4
a
Note
a
Note
4
4
4
4
23