Supported Networking Standards; Operating Environment; Mechanical Specifications - Siemens RUGGEDCOM RMC40 Installation Manual
4-port unmanaged ethernet switch
Hide thumbs
Also See for RUGGEDCOM RMC40:
- Installation manual (28 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
RUGGEDCOM RMC40
Installation Guide
Section 4.4
Supported Networking Standards
Parameter
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
Section 4.5
Operating Environment
Parameter
Ambient Operating Temperature
Ambient Relative Humidity
Ambient Storage Temperature
j
Typical. May change based on which fiber optic transceivers are installed. For more information, refer to
Section 4.6
Mechanical Specifications
Dimensions
Weight
Ingress Protection
Enclosure
Supported Networking Standards
10Base-FL
100Base-FX
Yes
Yes
Range
j
-40 to 80 °C
(-40 to 176 °F)
5% to 95%
-40 to 80 °C
(-40 to 176 °F)
Refer to
Chapter 5, Dimension Drawings
0.68 kg (1.5 lbs)
IP40 (1 mm or 0.04 in objects)
21 AWG Galvanized Steel
Yes
Yes
Comments
Measured from a 30 cm (12 in) radius surrounding the center of the
enclosure.
Non-condensing
Section 4.3, "Fiber Optic Ethernet Port
Technical Specifications
Notes
10Base-T
100Base-TX/100Base-FX
Full Duplex, Flow Control
Specifications".
Chapter 4
17
Advertisement
Table of Contents
