Siemens RUGGEDCOM RSG2100 Installation Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Network Router
  5. RUGGEDCOM RSG2100
  6. Installation manual
Siemens RUGGEDCOM RSG2100 Installation Manual

Siemens RUGGEDCOM RSG2100 Installation Manual

Hide thumbs Also See for RUGGEDCOM RSG2100:
Table of Contents

Advertisement

Quick Links

Download this manual
RUGGEDCOM RSG2100
Installation Guide
12/2015
RC1040-EN-09
Preface
Introduction
Installing Device
Communication Ports
Technical Specifications
Dimension Drawings
Certification
1
2
3
4
5
6

Advertisement

Table of Contents
loading

Related Manuals for Siemens RUGGEDCOM RSG2100

Summary of Contents for Siemens RUGGEDCOM RSG2100

  • Page 1 Preface Introduction Installing Device RUGGEDCOM RSG2100 Communication Ports Technical Specifications Dimension Drawings Installation Guide Certification 12/2015 RC1040-EN-09...
  • Page 2 Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
  • Page 3 RUGGEDCOM RSG2100 Installation Guide Contacting Address Telephone E-mail Siemens Canada Ltd. Toll-free: 1 888 264 0006 ruggedcom.info.i-ia@siemens.com Industry Sector Tel: +1 905 856 5288 300 Applewood Crescent Fax: +1 905 856 1995 www.siemens.com/ruggedcom Concord, Ontario Canada, L4K 5C7...
  • Page 4 RUGGEDCOM RSG2100 Installation Guide...

  • Page 5: Table Of Contents

    RUGGEDCOM RSG2100 Installation Guide Table of Contents Table of Contents Preface ....................... Alerts ..............................vii Related Documents ..........................vii Accessing Documentation ........................viii Training ............................viii Customer Support ..........................viii Chapter 1 Introduction ......................1.1 Feature Highlights ........................1 1.2 Description ..........................2 Chapter 2 Installing Device ....................
  • Page 6 RUGGEDCOM RSG2100 Table of Contents Installation Guide 3.3.2 Removing an SFP Optical Port ..................24 3.4 GBIC Optic Ethernet Ports ......................24 3.4.1 Installing a GBIC Optical Port ................... 25 3.4.2 Removing a GBIC Optical Port ..................26 3.5 BNC Ports ..........................26 Chapter 4 Technical Specifications ..................

  • Page 7: Preface

    Installation Guide Preface Preface This guide describes the RUGGEDCOM RSG2100. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device.

  • Page 8: Accessing Documentation

    Siemens sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request...

  • Page 9: Introduction

    RSG2100 highly versatile for any application and can support multiple fiber connectors (ST, MTRJ, LC, SC) without loss of port density. The RUGGEDCOM RSG2100 is packaged in a rugged galvanized steel enclosure with industrial grade DIN, panel, or 48 cm (19 in) rack-mount mounting options.

  • Page 10: Description

    Section 1.2 Description The RUGGEDCOM RSG2100 features various ports, controls and indicator LEDs on the display panel for connecting, configuring and troubleshooting the device. The display panel can be located on the rear, front or top of the device, depending on the mounting configuration.
  • Page 11 RUGGEDCOM RSG2100 Chapter 1 Installation Guide Introduction • Mode button – The Mode button sets the display mode for the port status indicator LEDs (i.e. Status, Duplex or Speed). It can also be used to reset the device if held for 5 seconds.
  • Page 12 RUGGEDCOM RSG2100 Chapter 1 Installation Guide Introduction Description...

  • Page 13: Installing Device

    Mounting the Device The RUGGEDCOM RSG2100 is designed for maximum mounting and display flexibility. It can be equipped with connectors that allow it to be installed in a 48 cm (19 in) rack, 35 mm (1.4 in) DIN rail, or directly on a panel.

  • Page 14: Mounting The Device To A Rack

    Section 2.1.1 Mounting the Device to a Rack The RUGGEDCOM RSG2100 can be secured to a standard 48 cm (19 in) rack using separately purchased rack mount adapters. The adapters can be installed at the front or rear of the chassis.

  • Page 15: Mounting The Device On A Din Rail

    Mounting the Device on a DIN Rail For DIN rail installations, the RUGGEDCOM RSG2100 can be equipped with panel/DIN rail adapters pre-installed on each side of the chassis. The adapters allow the device to be slid onto a standard 35 mm (1.4 in) DIN rail.

  • Page 16: Mounting The Device To A Panel

    Section 2.1.3 Mounting the Device to a Panel For panel installations, the RUGGEDCOM RSG2100 can be equipped with panel/DIN rail adapters pre-installed on each side of the chassis. The adapters allow the device to be attached to a panel using screws.

  • Page 17: Connecting Power

    Section 2.2 Connecting Power The RUGGEDCOM RSG2100 supports a single or dual redundant AC and/or DC power supplies. The use of two power modules is recommended to provide redundancy and load balancing. The RUGGEDCOM RSG2100 can be equipped with either a screw-type or pluggable terminal block, which provides power to both power supplies.

  • Page 18: Connecting Ac Power

    Chapter 2 RUGGEDCOM RSG2100 Installing Device Installation Guide • Use only #16 gage copper wiring when connecting terminal blocks. • For 100-240 VAC rated equipment, an appropriately rated AC circuit breaker must be installed. • A circuit breaker is not required for 12, 24 or 48 VDC rated power supplies.

  • Page 19: Connecting Dc Power

    RUGGEDCOM RSG2100 Chapter 2 Installation Guide Installing Device Figure 5: Terminal Block Wiring 1. Screw-Type Terminal Block 2. Pluggable Terminal Block 3. Jumper 4. Positive/Live (+/L) Terminal 5. Negative/Neutral (-/N) Terminal (-/N) 6. Surge Ground Terminal 7. Chassis Ground Terminal Connect the negative wire from the power source to the negative/neutral (-/N) terminal on the terminal block.
  • Page 20 Chapter 2 RUGGEDCOM RSG2100 Installing Device Installation Guide NOTE The screw-type terminal block is installed using Phillips screws and compression plates, allowing either bare wire connections or crimped terminal lugs. Use #6 size ring lugs for secure, reliable screws, which must be removed to make connections.

  • Page 21: Wiring Examples

    RUGGEDCOM RSG2100 Chapter 2 Installation Guide Installing Device Section 2.2.3 Wiring Examples The following illustrate how to connect power to single and dual power supplies. Figure 7: Single AC Power Supply Figure 8: Single DC Power Supply Wiring Examples...
  • Page 22 Chapter 2 RUGGEDCOM RSG2100 Installing Device Installation Guide Figure 9: Dual AC Power Supply Figure 10: Dual DC Power Supply Wiring Examples...

  • Page 23: Connecting The Failsafe Alarm Relay

    Control of the failsafe relay output is configurable through ROS. One common application for this relay is to signal an alarm if a power failure occurs. For more information, refer to the ROS User Guide for the RUGGEDCOM RSG2100. The following shows the proper relay connections.

  • Page 24: Grounding The Device

    Section 2.4 Grounding the Device The RUGGEDCOM RSG2100 chassis ground terminal uses a #6-32 screw. It is recommended to terminate the ground connection with a #6 ring lug and torque it to 1.7 N·m (15 lbf·in). Figure 13: Chassis Ground Connection 1.

  • Page 25: Cabling Recommendations

    RUGGEDCOM RSG2100 Chapter 2 Installation Guide Installing Device RS232 Console Port Connect a PC or terminal directly to the RS232 console port to access the boot-time control and ROS interfaces. The console port provides access to ROS's console and Web interfaces.

  • Page 26: Protection On Twisted-Pair Data Ports

    Section 2.6.1 Protection On Twisted-Pair Data Ports Siemens does not recommend the use of copper cabling of any length for critical, real-time substation automation applications. All copper Ethernet ports on RUGGEDCOM products include transient suppression circuitry to protect against damage from electrical transients and conform with IEC 61850-3 and IEEE 1613 Class 1 standards.

  • Page 27: Communication Ports

    Installation Guide Communication Ports Communication Ports The RUGGEDCOM RSG2100 can be equipped with various types of communication ports to enhance its abilities and performance. Figure 15: Port Assignment Each type of module has a specific location in the RUGGEDCOM RSG2100 chassis: •...

  • Page 28: Copper Ethernet Ports

    Section 3.1 Copper Ethernet Ports The RUGGEDCOM RSG2100 supports several 10/100/1000Base-TX Ethernet ports that allow connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with either RJ45 or Micro-D male connectors. The RJ45 and Micro-D connectors are directly connected to the chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables.
  • Page 29 RUGGEDCOM RSG2100 Chapter 3 Installation Guide Communication Ports State Description No link detected The following are the pin-out descriptions for the RJ45 and Micro-D connectors: Name Description 10/100Base-TX 1000Base-TX BI_DA+ Receive Data+ or Bi-Directional Pair A+ BI_DA- Receive Data- Figure 24: RJ45 Ethernet Port Pin Configuration...

  • Page 30: Fiber Optic Ethernet Ports

    Chapter 3 RUGGEDCOM RSG2100 Communication Ports Installation Guide Section 3.2 Fiber Optic Ethernet Ports Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.

  • Page 31: Installing An Sfp Optical Port

    To install an SFP optical port, do the following: CAUTION! Electrical hazard – risk of damage to equipment. Use only components certified by Siemens with RUGGEDCOM products. Damage to the module and device may occur if compatibility and reliability have not been properly assessed.

  • Page 32: Removing An Sfp Optical Port

    Chapter 3 RUGGEDCOM RSG2100 Communication Ports Installation Guide Section 3.3.2 Removing an SFP Optical Port To remove an SFP optical port, do the following: CAUTION! Electrical hazard – risk of damage to equipment. Make sure all electrostatic energy is dissipated before performing installing or removing components from the device.

  • Page 33: Installing A Gbic Optical Port

    To install a GBIC optical port, do the following: CAUTION! Electrical hazard – risk of damage to equipment. Use only components certified by Siemens with RUGGEDCOM products. Damage to the module and device may occur if compatibility and reliability have not been properly assessed.

  • Page 34: Removing A Gbic Optical Port

    Chapter 3 RUGGEDCOM RSG2100 Communication Ports Installation Guide Section 3.4.2 Removing a GBIC Optical Port To remove an GBIC optical port, do the following: CAUTION! Electrical hazard – risk of damage to equipment. Make sure all electrostatic energy is dissipated before performing installing or removing components from the device.
  • Page 35 Inputs are controlled by RUGGEDCOM ROS and only one can be active at any time. For information about activating an input, refer to the RUGGEDCOM ROS User Guide for the RUGGEDCOM RSG2100. The color of the Sync LED on the front panel of the PTP module indicates the status of the incoming timing signal: •...
  • Page 36 RUGGEDCOM RSG2100 Chapter 3 Installation Guide Communication Ports BNC Ports...

  • Page 37: Technical Specifications

    RUGGEDCOM RSG2100 Chapter 4 Installation Guide Technical Specifications Technical Specifications The following sections provide important technical specifications related to the device and available modules: • Section 4.1, “Power Supply Specifications” • Section 4.2, “Failsafe Relay Specifications” • Section 4.3, “Supported Networking Standards”...

  • Page 38: Supported Networking Standards

    Chapter 4 RUGGEDCOM RSG2100 Technical Specifications Installation Guide Parameter Value (Resistive Load) Maximum Switching Capacity 150 W, 500 VA Section 4.3 Supported Networking Standards 1000 Mbps Standard 10 Mbps Ports 100 Mbps Ports Notes Ports IEEE 802.3 10BaseT/10BaseFL ü IEEE 802.3u 100BaseTX/100BaseFX ü...

  • Page 39: Copper Gigabit Ethernet (1 Gbps) Port Specifications

    NOTE • Maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associate when determining maximum segment distances. • All optical power numbers are listed as dBm averages.

  • Page 40: Fiber Optic Ethernet Port Specifications

    Chapter 4 RUGGEDCOM RSG2100 Technical Specifications Installation Guide Section 4.5 Fiber Optic Ethernet Port Specifications The following sections list specifications of the optical transceivers used in the modules available for the RUGGEDCOM RSG2100: • Section 4.5.1, “10FL Ethernet Optical Specifications”...

  • Page 41: Gigabit Ethernet (1 Gbps) Optical Specifications

    All optical power numbers are listed as dBm averages. Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associates when determining maximum segment distances.

  • Page 42: Operating Environment

    All optical power numbers are listed as dBm averages. Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associates when determining maximum segment distances.

  • Page 43: Mechanical Specifications

    RUGGEDCOM RSG2100 Chapter 4 Installation Guide Technical Specifications Section 4.7 Mechanical Specifications Parameter Value Dimensions Refer to Chapter 5, Dimension Drawings Weight 5.2 kg (11.5 lbs) Ingress Protection IP40 (1 mm or 0.04 in objects) Enclosure 18 AWG Galvanized Steel...
  • Page 44 RUGGEDCOM RSG2100 Chapter 4 Installation Guide Technical Specifications Mechanical Specifications...

  • Page 45: Dimension Drawings

    RUGGEDCOM RSG2100 Chapter 5 Installation Guide Dimension Drawings Dimension Drawings NOTE All dimensions are in millimeters, unless otherwise stated. NOTE Dimensional tolerances are in accordance with ISO 2768-mK, unless otherwise stated. 438.15 Figure 37: Overall Dimensions...
  • Page 46 Chapter 5 RUGGEDCOM RSG2100 Dimension Drawings Installation Guide 32.77 21.08 11.68 479.29 478.79 4.57 Figure 38: Rack Mount Dimensions...
  • Page 47 RUGGEDCOM RSG2100 Chapter 5 Installation Guide Dimension Drawings 486.4 476.3 10.4 11.7 Figure 39: Panel and DIN Rail Mount Dimensions...
  • Page 48 RUGGEDCOM RSG2100 Chapter 5 Installation Guide Dimension Drawings...

  • Page 49: Certification

    RUGGEDCOM RSG2100 Chapter 6 Installation Guide Certification Certification The RUGGEDCOM RSG2100 device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies. • Section 6.1, “Standards Compliance” • Section 6.2, “Agency Approvals”...

  • Page 50: Emc And Environmental Type Tests

    ISO9001:2008 certified quality program Section 6.3 EMC and Environmental Type Tests The RUGGEDCOM RSG2100 has passed the following EMC and environmental tests. IEC 61850-3 EMC Type Tests NOTE • In the case of an all fiber port configuration, this product meets all Class 2 requirements. Otherwise, all Class 1 requirements are met for copper ports.
  • Page 51 5 kV AC Power Ports Siemens-specified severity levels IEEE 1613 EMC Immunity Type Tests NOTE The RUGGEDCOM RSG2100 meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper ports. Description Test Levels Enclosure Contact +/- 2 kV, +/-4 kV, +/-8 kV...
  • Page 52 Chapter 6 RUGGEDCOM RSG2100 Certification Installation Guide Description Test Levels Earth Ground Ports +/- 4 kV Oscillatory Signal Ports 2.5 kV Common Mode @1MHz DC Power Ports 2.5 kV common, 1 kV differential mode @ 1 MHz AC Power Ports 2.5 kV common, 1 kV differential mode @ 1 MHz...

Table of Contents