Side Panel (For Equipment Connections) - Roland V-1SDI Owner's Manual

Panel Descriptions

Side Panel (for Equipment Connections)

MIC Jack
Here is where you connect a microphone.
This accepts a miniature stereo phone plug.
You can also use plug-in-power microphones.
[MIC] Knob
This adjusts microphone input sensitivity.
[FORMAT] Switch
This switches the input/output format.
* Before operating the [FORMAT] switch, be sure the
power to the V-1SDI is turned off.
RS-232 Connector
Here you connect a device used to
operate the V-1SDI by remote control
(such as an RS-232-compatible
computer).
10
PHONES Jack
This is for connecting headphones. This
accepts a miniature stereo phone plug.
[PHONES] Knob
This adjusts the volume level for headphones.
p. 14
Attaching the Power Cord Hook
1.
p. 31
2.
RS-232
connector
Detach the retainer screw indicated in the
figure.
Using the screw you removed in step 1,
secure the power-cord hook in place as
shown in the figure.
Cord hook