2.
Press [Paper Size].
3.
Press [Custom Size].
4.
Enter the horizontal size with the number keys, and then press [ ].
5.
Enter the vertical size with the number keys, and then press [ ].
6.
Press [OK] twice.
7.
Place the originals, and then press the [Start] key.
• To change the value you entered, press the item you want to change, and then enter a new value.
• To register the custom size entered in step 5, press [Program] and then press [Exit] in the
confirmation screen.
• Only one custom size can be stored.
• To recall the custom size stored, press [Recall].
• If you do not register the custom size, the size you set is deleted when modes are cleared.
Copying onto Special Paper from Tray 1
When copying onto special paper such as OHP transparencies, thick paper such as postcards, adhesive
label paper, and thin paper, select the type and size of paper.
Copying from Tray 1
2
39