Ricoh Aficio MP 2353 Operating Instructions Manual page 92

2. Basic Copying
2
When the booklet finisher is attached:
3. Press [OK].
4. Enter the number of copy sets with the number keys.
5. Place the originals, and then press the [Start] key.
• When placing originals on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• You can change the punch hole types shown on the initial display under Input / Output in User
Tools. For details, see "Input / Output".
• Paper can be punched only if it meets the machine's size and orientation requirements. For details
about which sizes and weights of paper that can be punched, see "Appendix", About This
Machine.
• When using the Punch and Combine, Double Copies, or Auto Reduce / Enlarge, the message
"Orig. and paper orientation mismatched for Punch mode. Cancel Punch mode or change paper
orientation in tray." may appear because of the orientation of the original and the copy paper. If
this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary slightly.
• p.219 "Input / Output"
90