3. Advanced Copying
1.
Press [Reduce / Enlarge].
3
2.
Press [Dir. Size Mag. mm].
3.
Enter the horizontal size of the original with the number keys, and then press [ ].
4.
Enter the horizontal size of the copy with the number keys, and then press [ ].
5.
Enter the vertical size of the original with the number keys, and then press [ ].
6.
Enter the vertical size of the copy with the number keys, and then press [ ].
7.
Press [OK] twice.
• You can enter the horizontal length of an original and copies between 1 and 9999 mm in
increments of 1 mm. You can enter the vertical length of an original and copies between 1 and
999 mm in increments of 1 mm.
• To change the value you entered, press the key you want to change, and then enter a new value.
• The machine selects reproduction ratios of between 25 and 400%.
• When entering a size in mm, if the calculated ratio is over the maximum or under the minimum
ratio, it is automatically adjusted to within available range. However, with some ratios, parts of the
image might not be copied or margins will appear on copies.
120