Med Network Policy - Dell X1000 Series User Manual

Hide thumbs Also See for X1000 Series:
Table of Contents

Advertisement

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
System Capabilities — Primary functions of the switch, and whether
or not these functions are enabled in the switch. The capabilities are
indicated by two octets. Bits 0 through 7 indicate Other, Repeater,
Bridge, WLAN AP, Router, Telephone, DOCSIS cable device, and
station respectively. Bits 8 through 15 are reserved.
802.3 MAC-PHY — Duplex and bit rate capability and the current
duplex and bit rate settings of the sending device. It also advertises
whether the current settings are due to auto-negotiation or manual
configuration.
An alternative way to select the TLVs is to select the Use Default field, in
which case only mandatory TLVs are used. These are: Chassis subtype
(MAC address), Port subtype (port number), and TTL (time-to-leave).
5 Enter the Management IP Address that is advertised from the interface.
Check Use Default to use the default Management IP address.

MED Network Policy

A network policy instructs the connected media endpoint devices as to how to
send traffic, for example, a policy can be created for VoIP phones that
instructs them to:
Send voice traffic on VLAN 10
Tag voice traffic with DSCP=63
Transmit data-traffic to the switch (from the PC connected to the switch
through the VoIP phone) without modification to traffic sent by the PC
(typically, Untagged).
For network policies to be implemented, they must be created and then
associated with ports.
Before policies are defined, the administrator must create the VLANs, and
configure memberships in the VLANs, based on the specification in the
LLDP-MED network policies.
To add a MED network policy:
1 Click Network Administration > Link Layer Discovery Protocol (LLDP)
> MED Network Policy.
Previously-defined network policies are displayed.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
210
Network Administration: Link Layer Discovery Protocol (LLDP)
Guide\Dell_Astute_Network_Admin_LLDP.fm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X4000 series

Table of Contents