Dell X1000 Series User Manual page 121

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
– Timeout for Replay — Enter the amount of time that can pass before
the connection between the device and the TACACS+ server times
out.
3 Click OK.
4 To add a TACACS+ server, click Edit, Add and enter the following fields:
– Supported IP Format — Select whether the IPv4 or IPv6 format is
supported for the TACACS+ server IP address.
– IPv6 Address Type — Select whether the Link-Local or Global format
of the IPv6 Address is supported for the TACACS+ server IP address.
– Host IP Address — Enter the TACACS+ server IP address.
Priority — Enter the order in which the TACACS+ servers are used if
–
several are defined.
– Authentication Port — Enter the port number through which the
TACACS+ session occurs.
– Key String — Enter the key of the TACACS+ server or select Use
Default.
– Timeout for Reply (sec) — Enter the amount of time that can pass
before the connection between the device and the TACACS+ server
times out or select Use Default.
Single Connection — Select Enable to maintain a single open
–
connection between the device and the TACACS+ server or Disable
not to maintain a connection.
RADIUS
Remote Authentication Dial-In User Service (RADIUS) servers provide
additional security for networks. Up to eight RADIUS servers can be defined.
RADIUS servers provide a centralized authentication method for:
• Telnet Access
• Secure Shell Access
• Web Access
• Console Access
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_SwitchManagement.fm
Switch Management
121