Dell X1000 Series User Manual page 113

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
To set a local password to control access to Normal and Privilege levels
activities.
1 Click Switch Management > Management Security > Enable Password
for CLI.
1 Click Edit to enter the fields:
– Select Enable Access Level — Select the access level to associate with
the enable password. The following access levels are available:
• Read-Only — Users with this access level can only view
information.
• Read-Write — Users with this access level can access and use the
Networking Administrator.
– Password — Enter the enable password.
– Confirm Password — Confirm the password.
– Expiry Date — If Global Aging was selected in the
Management, displays the expiration date of the enable password.
Lockout Status — Displays the number of failed authentication
–
attempts since the user last logged in successfully (if the Enable
Login Attempts checkbox is selected in the
Management
locked.
– Reactivate Lockout Status — Check to reactivate the specified user's
access rights. Access rights can be suspended after unsuccessfully
attempting to login.
Active Users
To view the active users on the device:
• Click Switch Management > Management Security > Active Users.
The following fields are displayed for all active users:
Name — Active users logged into the device.
–
Protocol — The management method by which the user is connected
–
to the device.
– Location — The user's IP address.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_SwitchManagement.fm
page.) Specifies LOCKOUT, when the user account is
Global Password
Global Password
Switch Management
113