Dell X1000 Series User Manual page 61

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
– Re-Activate Suspended Port(s)—Select Enabled to reactive a port if
the port has been disabled through the locked port security option or
Disabled to leave it down.
5 Click Next.
6 Depending on the type of port being configured, enter the following fields:
Copper 10/100/1000MBase-T Ports
– Ports — Port numbers.
– Port Type — Port type.
– Admin Speed — Select the configured rate for the port. The port type
determines the available speed setting options. You can designate
Administrative Speed only when port auto-negotiation is disabled.
– Admin Duplex Mode — Select the port duplex mode (this is only
possible if Auto Negotiation is not enabled). The options are:
Full — The interface supports transmission between the device
•
and the client in both directions simultaneously.
• Half — The interface supports transmission between the device
and the client in only one direction at a time.
– Auto Negotiation — Select to enable/disable auto-negotiation on the
port. Auto-Negotiation enables a port to advertise its transmission
rate, duplex mode, and Flow Control abilities to other devices.
– Admin Advertisement — Check the auto-negotiation setting the port
advertises. The possible options are:
• Max Capability — The port advertises all the options that it can
support.
• 10 Half — The port advertises for a 10 mbps speed port and half
duplex mode setting.
• 10 Full — The port advertises for a 10 mbps speed port and full
duplex mode setting.
• 100 Half — The port advertises for a 100 mbps speed port and
half duplex mode setting.
• 100 Full — The port advertises for a 100 mbps speed port and full
duplex mode setting.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_Dashboard.fm
Dashboard
61