Dell X1000 Series User Manual page 212

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Move the TLVs to be published to the Tx Optional TLVs list.
– Available Network Policy — Contains a list of network policies that
can be assigned to a port. Move the network policies to be assigned to
the port to the Network Policy list.
– Location Coordinate — Enter the device's location map coordinates.
– Location Civic Address — Enter the device's civic or street address
location, for example 414 23rd Ave E.
– Location ECS ELIN — Enter the device's ECS ELIN location.
5 To view MED details for a port, return to the main page and click the
Detail icon of the selected port.
The following fields are displayed for the port:
– Auto-Negotiation Status — Enabled specifies that auto-negotiation is
enabled on the port; Disabled indicates that it is not.
Advertised Capabilities — The list of port capabilities advertised for
–
the port.
– MAU Type — The Media Attachment Unit type. The MAU performs
physical layer functions, including digital data conversion from the
Ethernet interfaces' collision detection and bit injection into the
network, for example, 100BASE-TX full duplex mode.
– System Name — The system's assigned name (in alpha-numeric
format). This value equals the sysName object.
System Description — A description of the network entity (in alpha-
–
numeric format). This includes the system's name and versions of the
hardware, operating system, and networking software supported by the
switch. This value equals the sysDescr object.
Device ID — The device ID advertised, for example, the device MAC
–
address.
– Device Type — The type of device.
– LLDP MED Capabilities — The TLVs that are advertised by the
port.
– LLDP MED Device Type — Specifies whether a sender is a network
connectivity device or an endpoint device.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
212
Network Administration: Link Layer Discovery Protocol (LLDP)
Guide\Dell_Astute_Network_Admin_LLDP.fm