Dell X1000 Series User Manual page 195

Hide thumbs Also See for X1000 Series:
Table of Contents

Advertisement

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_STP.fm
Port State — Displays whether the port is enabled or disabled in the
specific instance.
Type — Displays whether MSTP treats the port as a point-to-point
port, or a port connected to a hub, and whether the port is internal to
the MST region or a boundary port. A Master port provides
connectivity from a MSTP region to the outlying CIST root. A
Boundary port attaches MST bridges to LAN in an outlying region. If
the port is a boundary port, it also indicates whether the device on the
other side of the link is working in RSTP or STP mode.
Role — Displays the port role assigned by the STP algorithm in order
to provide to STP paths. The possible options are:
Root — This port provides the lowest cost path to forward packets
to root switch.
Designated — This port is the interface through which the bridge
is connected to the LAN, which provides the lowest cost path
from the LAN to the Root Bridge.
Alternate — This port provides an alternate LAG to the root
switch from the root interface.
Backup — This port provides a backup path to the designated
port. Backup ports occur only when two ports are connected in a
loop by a point-to-point link. Backup ports also occur when a LAN
has two or more connections connected to a shared segment.
Disabled — This port is not participating in the Spanning Tree.
Interface Priority — Enter the interface priority for specified instance.
Path Cost — Enter the port contribution to the Spanning Tree
instance. If a loop occurs, the spanning tree considers path cost when
selecting an interface to put in the Forwarding state or select Use
Default.
Designated Bridge ID — Displays the bridge ID number that
connects the link or shared LAN to the root.
Designated Port ID — Displays the Port ID number on the
designated bridge that connects the link or the shared LAN to the
root.
Designated Cost — Displays the cost of the path from the link or the
shared LAN to the root.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Network Administration: Spanning Tree and LAG
195

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X4000 series

Table of Contents