Supplementary System Components and Encoder System Integration
7.3 Sensor Module Cabinet-Mounted SMC10
7.3.5
Installation
Installation
1. Place the component on the DIN rail.
2. Snap the component on to the DIN rail. Make sure that the mounting slides at the rear
latch into place.
3. You can now move the component on the DIN rail to the left or to the right to its final
position.
Removal
Figure 7-6
244
Releasing the component from a DIN rail
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
AC Drive