Siemens SINAMICS S120 Manual page 232

Supplementary System Components and Encoder System Integration
7.2 Basic Operator Panel BOP20
BOP20 keyboard
Table 7-4 Assignment of the BOP20 keyboard
Key Name
ON
OFF
Functions
Parameter
Raise
Lower
Displays and operating the BOP20
Information about the displays and using the BOP20 is provided in the following reference:
Reference: /IH1/ SINAMICS S120 Commissioning Manual.
232
Meaning
Powering-up the drives for which the command "ON/OFF1",
"OFF2" or "OFF3" should come from the BOP.
Powering-down the drives for which the commands "ON/OFF1",
"OFF2" or "OFF3" should come from the BOP.
Note:
The effectiveness of these keys can be defined using the
appropriate BICO parameterization (e.g. using these keys, it is
possible to simultaneously control all of the axes that have been
configured).
The structure of the BOP control word corresponds to the structure
of the PROFIBUS control word.
The significance of these keys depends on the actual display.
Note:
The effectiveness of this key to acknowledge faults can be defined
using the appropriate BiCo parameterization.
The significance of these keys depends on the actual display.
The keys are dependent on the actual display and are used to
raise or lower values.
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
AC Drive