Steering Wheel Lock/Ignition Switch; Adjusting Steering Wheel - Chery Tiggo Owner's Manual

Steering Wheel Lock/Ignition Switch

The combined steering wheel lock/ignition switch
has key positions as follows:
LOCK - the ignition switch is turned off and
steering wheel is locked.
In order to make sure that the steering wheel is
locked, after the key is pulled out, turn the steering
wheel until hearing the lock meshing sound of
steering wheel.
ACC - steering system is unlocked. The electric
accessory circuit is on and the electric appliances
such as audio player, cigar lighter and wiper can
be operated, but the ignition switch and main
electric circuits are all cut off.
If the key can't or is difficult to be turned to this
position from LOCK, the steering wheel may be
turned around gently and the lock device of
steering wheel will be released.
Operation & Adjustment of Vehicle inside Device
The ignition key shall not stay in this position too
long time to avoid the battery power loss.
ON - the ignition circuit is connected. All the
electric appliance loops can work, and the warning
lamp and indicating lamp light. This is the normal
position of key when the vehicle is being driven
and the position which shall be chosen when the
vehicle is being trailed.
START - the starting motor is connected to start
engine.
When the locking hole is in this position, the wiper
and audio player of high power consumption will
be cut off to ensure vehicle starting.
If the starting fails, the ignition key shall be turned
to the LOCK position before restarting and then
turned to this position. After start, the key will
automatically go to ON position when releasing the
key.
Once the engine is started, the key
shall be loosened immediately.
After pulling the key out of ignition switch, the
steering wheel lock will be activated to lock up the
steering wheel.
When vehicle is moving, do not
turn the key to position LOCK.

Adjusting Steering Wheel

55