Replacing Wheel - Chery Tiggo Owner's Manual

Replacing Wheel

Before jacking up the vehicle, make
sure to observe the following precautions.
Park your vehicle in a proper place and make sure
that the replacement of tyres will not affect the
traffic or endanger yourself.
Make sure that the vehicle is on a firm and even
ground. If necessary, use a proper wedge block to
stop the wheels and further secure your vehicle.
Make sure that the front wheels point to the front.
If the vehicle is equipped with the automatic
transmission, please set it to position P.
Spare Tyre
Please follow below regulations in
case certain tyre size (steel rim or tyre) differs
with other mounted tyre.
● Whenever, your vehicle shall not be mounted
with over 1 spare tyre.
● Do not use skid chain for spare tyre.
● Not to pass the auto car washing machine.
Spare Tyre on Back Door
1. Open the spare tyre cover;
2. Unscrew the bolt fully;
3. Take out the spare tyre.
On-vehicle Jack
Jack up the vehicle with the
on-vehicle jack only when a wheel is to be
replaced. In this case, operation under the
vehicle is prohibited.
Emergency Procedure
The maximum operating load of the
jack is 1200 kg.
The jack is located in storage slot below bottom
plate of luggage boot.
Rear tyre jack position
Front tyre jack position
Outer beam of
bottom plate
One welded
supporting block
109