Touchpad Cable - HP ProBook x360 11 G1 Maintenance And Service Manual

12. Remove the keyboard/top cover (5).
Reverse this procedure to install the keyboard/top cover.

TouchPad cable

NOTE: The TouchPad cable is included in the Cable Kit, spare part number 917064-001.
Before removing the TouchPad cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
Remove the TouchPad cable:
1. Turn the keyboard/top cover upside down with the front edge toward you.
2. Detach the adhesive strip (1) the secures the TouchPad cable to the keyboard/top cover.
22 Chapter 4 Removal and replacement procedures
Keyboard/top cover on page 18).