HP ProBook x360 11 G1 Maintenance And Service Manual page 52

14. If it is necessary to replace the display hinges:
a. Remove the display bezel.
b. Remove the display panel.
c. Release the rubber cable clip (1) containing the display panel cable from the left display hinge.
d. Release the rubber cable clip (2) containing the wireless antenna cables and webcam/microphone
module cable from the right display hinge.
e. Remove the four Phillips PM2.0×2.3 screws (3) that secure the display hinges to
the display back cover.
f. Remove the six Phillips PM2.5×2.5 broad head screws (4) that secure the display hinges to
the display back cover.
g. Remove the display hinges (5).
The display hinges are available using spare part number 917065-001.
46 Chapter 4 Removal and replacement procedures