Second Webcam - HP ProBook x360 11 G1 Maintenance And Service Manual

Second webcam

NOTE: The second webcam cable is included in the Cable Kit, spare part number 917064-001.
Description
Second webcam (includes cable)
Webcam transfer board (includes cable)
Before removing the second webcam, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
Remove the second webcam:
1. Turn the keyboard/top cover upside down with the front edge toward you.
2. Remove the Phillips PM2.0×2.3 screw (1) that secures the webcam transfer board to the keyboard/
top cover.
3. Remove the two Phillips PM2.0×2.0 broad head screws (2) that secure the second webcam bracket to
the keyboard/top cover.
4. Remove the Phillips PM1.6×2.0 screw (3) that secures the second webcam to the keyboard/top cover.
5. Detach the second webcam cable (4) from the keyboard/top cover. (The second webcam cable is secured
to the keyboard/top cover with double-sided adhesive.)
6. Remove the second webcam bracket (5).
The second webcam bracket is included in the Bracket Kit, spare part number 917057-001.
Keyboard/top cover on page
Spare part number
917055-001
917053-001
18).
Component replacement procedures 25