HP ProBook x360 11 G1 Maintenance And Service Manual page 50

c. Disconnect the LED board cable (2) from the LED board.
d. Remove the LED board.
The LED board is available using spare part number 917050-001.
13. If it is necessary to replace the display panel:
a. Remove the display bezel.
b. Remove the four Phillips PM2.0×2.3 screws (1) that secure the display panel to
the display back cover.
c. Detach the piece of protective tape (2) that secures and protects the display panel cable.
CAUTION:
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
44 Chapter 4 Removal and replacement procedures
Before turning the display panel upside down, make sure the work surface is clear of