HP ProBook x360 11 G1 Maintenance And Service Manual page 49

c. Detach the G-sensor module (2) from the display back cover. (The G-sensor module is secured to
the display back cover with double-sided adhesive.)
d. Remove the G-sensor module.
The G-sensor module is available using spare part number 917049-001.
12. If it is necessary to replace the LED board:
a. Remove the display bezel.
b. Detach the LED board (1) from the display back cover. (The LED board is secured to the display back
cover with double-sided adhesive.)
Component replacement procedures 43