Ricoh SP 220SNw User Manual page 186

7. Configuring the Machine Using the Control Panel
Low Humidity Mode
Item
Low Humidity
Mode
Image Density
Item
Image Density
Fusing Unit Amelrtn.Mode
Item
Fusing Unit
Amelrtn.Mode
184
Description
If the machine is used in a room where
humidity level is low, black lines of a
few millimeters thick may appear on
printouts with 75-millimeter spaces in
between. Selecting [On] for this setting
may prevent these lines from
appearing (wait for about one day
until this setting becomes effective).
Note that when this setting is enabled,
the machine automatically performs
self-maintenance in every 10 minutes.
Description
Adjusts the density of images on prints.
Description
If the toner is not transferred properly,
causing the paper to be stained, select
[On] to improve transferability.
Value
• Off
• On
Default: [Off]
Value
-3 to +3
Default: 0
Value
• Off
• On
Default: [Off]