Ricoh SP 220SNw User Manual page 191

Item
System Auto Sets the machine to return to
Reset Timer the mode specified in
[Function Priority].
Energy Saver Sets the machine to enter
Mode Energy Saver mode, Energy
Saver mode 1 or Energy
Saver mode 2, to reduce
power consumption. The
machine recovers from
Energy Saver mode when it
receives a print job, prints a
received fax, or when any
key is pressed.
Description
• On (30 sec., 1 min., 2 min., 3 min., 5 min., 10
• Off
Default: [On] (1 minute)
• EnergySaverMode 1
• EnergySaverMode 2
Value
min.)
The machine enters Energy Saver mode 1 if
the machine has been idle for about 30
seconds. It takes less time to recover from
Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power
consumption is higher in Energy Saver mode 1
than in Energy Saver mode 2.
Default: [Off]
• Off
• On
The machine enters Energy Saver mode 2
after the period of time specified for this setting
is passed. The machine consumes less power
in Energy Saver mode 2 than in Energy Saver
mode 1, but it takes longer to recover from
Energy Saver mode 2 than from Energy Saver
mode 1.
• Europe
• On (1 to 20 minutes)
• 30sec
• Off
Default: [30sec]
• Countries other than European countries
• On (1 to 240 minutes)
• 30sec
• Off
Administrator Settings
189