Ricoh PRO 8100S Operating Instructions Manual page 80

4. Troubleshooting Paper Delivery Problems
Solution:
Carry out the following sequence of procedures. Terminate the sequence as soon as the problem is
resolved.
Procedure 1: Cleaning the antistatic brushes in the exit transport and inverter transport of the
drawer
Clean the antistatic brushes in the exit transport and inverter transport of the drawer with a blower
brush.
• Antistatic brushes in the exit transport and inverter transport
Procedure 2: Disabling the decurl setting and delivering sheets with their printed side facing
down
• Apply this procedure only when all of the following conditions are met.
• A back-curl is required to flatten curls with the decurler unit.
• Sheets are delivered with their printed side facing up in the post-processing machine.
1. In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled
Operators] menu, select [Adjust Paper Curl] and check the present degree of decurling (Off,
Weak, or Strong).
2. Is it "Adjust
Yes Go to the next step.
No Contact your service representative.
3. Is this setting essential?
Yes Go to the next step.
No Set [Adjust Paper Curl] to "Adjust
4. Are the sheets delivered with their printed side facing up.
78
Curl: Weak" or "Adjust
CZC306
Curl: Strong"?
Curl: Off" (set it back to the default value).