Ricoh PRO 8100S Operating Instructions Manual page 109

Output tray
Paper feed direction
Solution:
Depending on the cause of the problem, do one of the following:
<Sheet bending>
There is airflow in the room.
Minimize the airflow. For instance, turn the air conditioner off.
Sheets are curled upward.
<If the decurler unit is used>
1. In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled
Operators] menu, set [Adjust Paper Curl] to "Adjust
To control the level of decurling, select "Weak" if the present setting is "Off" or
"Strong" if the present value is "Weak".
<If the decurler unit is not used>
1. Load the sheets the other way up.
Paper of Paper Weight 0 is being used.
If paper of Paper Weight 0 is being used, attach the Z-fold support tray for multi-folding unit.
For details about attaching the Z-fold support tray for multi-folding unit, see "Copy/
Document Server" supplied with the machine.
<One sheet pushing out another or sheets becoming crimped>
Sheets are curled downward.
<If the decurler unit is used>
1. In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled
Operators] menu, set [Adjust Paper Curl] to "Adjust
To control the level of decurling, select "Weak" if the present setting is "Off" or
"Strong" if the present value is "Weak".
Paper exit
CEZ596
Finisher SR5050/SR5060
Curl".
Curl".
107