Ricoh PRO 8100S Operating Instructions Manual page 66

4. Troubleshooting Paper Delivery Problems
The paper size/orientation/type is not specified correctly.
In tray paper settings, specify the size, orientation, and type of the paper in use.
For details about tray paper settings, see "Changing Tray Paper Settings", Paper Settings Reference.
Colored paper or transparencies are loaded in the paper tray.
Paper edges may not have been detected correctly.
Adjust the color paper edge detection.
1. In [Advanced Settings] for the custom paper in use, select [Color Paper Edge Detection Adjustment]
and make a note of the present value.
2. Increase the value in [Color Paper Edge Detection Adjustment].
3. Print the image. Is the problem resolved?
Yes Finished!
No Keep increasing the value until the problem is resolved.
If the problem persists even though the setting has reached its maximum value, restore the
value noted in step 1 and go to the next step.
4. Decrease the value in [Color Paper Edge Detection Adjustment].
5. Print the image. Is the problem resolved?
Yes Finished!
No Keep decreasing the value until the problem is resolved.
If the problem persists even though the setting has reached its minimum value, restore the
value noted in step 1 and go to the next step.
6. In [Advanced Settings] for the custom paper in use, set [Skew Detection] to [Off].
7. Print the image. Is the problem resolved?
Yes Finished!
No Contact your service representative.
Sheets of mixed type, thickness, or color are loaded in the paper tray.
Load identical sheets in the paper tray.
64