3. Troubleshooting Image Quality Problems
Solution:
1.
In [Advanced Settings] for the custom paper in use, select [Image Transfer Current
Setting].
2.
Check the present value. Is it lower than 100 A?
Yes
Carry out all of the following:
(1) Increase the value by 5 A in [Image Transfer Current Setting].
(2) Set [Paper Transfer Current; Trail Edge] to "200%".
(3) Set [Paper Transfer Current; Trail Edge Dist] to "30 mm".
No
No further improvement is likely. Contact your service representative.
3.
Print the image. Is the problem resolved?
Yes
Finished!
No
Repeat Steps 1 to 3. If the problem persists even though you have increased the value to
100 A, contact your service representative.
32