When Unable To Send - Konica Minolta 7145 Internet Fax / Fax Operations

When Unable to Send

When Unable to Send
When you are unable to send a FAX, an error message is displayed on the screen. Press
[CLEAR] or [STOP] on the control panel to clear the error message.
DETAILS
For detail, see "Cannot Send Messages" (p. 8-2).
Redialing
Redialing refers to dialing the number of the same remote station again.
If a facsimile cannot be sent due to a busy signal from the receiving machine or for some
other reason, the machine redials the number after a predetermined amount of time has
elapsed. During that interval before the number is redialed, the transmission document is
treated as a reserved document waiting to be sent.
DETAILS
The redialing function is set at factory to redial one time after a three-minute interval. The
number of redials and the redialing interval can be changed in the Key Operator mode. For
detail, see "Line Parameter Set" (p. 14-23).
Transmitting - (continued)
Simple FAX
Transmission
Placing the Original
on the Machine
Setting Transmission
Conditions
Selecting a
Remote Station
Scanning
Transmitting
Reserving
Transmission
Manual Transmission
Cancelling
Transmission
Confirming Reserved
Documents
Confirming
Communication Results
Memory
Transmissions
Total Page Set
Timer
Transmission
International
Communication
Sender
Information
6-25