Konica Minolta 7145 Internet Fax / Fax Operations page 184

Specifications
Main product specifications relating to facsimile functions are indicated below.
Specifications are subject to change without notice.
Item
Image memory capacity
Max. no. of stored pages
Applicable lines
Scanning line density
Baud rate
Transmission time
Coding methods
Max. scanning size
Max. recording size
9-2
16 MB fixed (common memory with scanner)
Approx. 453 pages
(numbers of pages in the case of storing Konica standard
A4-size pages containing approximately 700 characters at
"fine" resolution)
Subscriber telephone lines (including facsimile communica-
tion networks)
PBX lines
G3 S-Fine: 400 x 400 pixels / 25.4 mm
16 x 15.4 lines / mm
8 x 15.4 lines / mm
Fine: 200 x 200 pixels / 25.4 mm
8 x 7.70 lines / 25.4 mm
Normal: 200 x 100 pixels /25.4 mm
8 x 3.85 lines / mm
Communications are performed at any of the above scan-
ning line densities according to the capabilities of the
remote station machine.
2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200,
21600, 24000, 26400, 28800, 31200, 33600 bps
2 seconds
Time if sending Konica standard A4-size pages containing
approximately 700 characters at "normal" resolution. This
is the transmission time for the image only, and does not
include the time required for communication control.
Actual communication time varies according to the con-
tents of the originals, the type of telephone line of the
remote station and factors.
MH, MR, MMR, JBIG
A3 (432 mm x 297 mm)
Width: 297 mm
Length: MAX. 800 mm (Long Original Mode)
A3 (420 mm x 297 mm)
Originals in excess of 840 mm cannot be received.
When receiving originals longer than the paper size in the
paper trays, record the original after reducing.
Specifications