Cannot Send Messages - Konica Minolta 7145 Internet Fax / Fax Operations

Cannot Send Messages

When a document cannot be sent, try to correct the problem by referring to the table below. If the
document still cannot be sent properly even after attempting to correct the problem, please con-
tact your service representative.
HINTS
•
For detail about troubles of the Internet Fax, see p.4-2.
•
Refer to "Error Message Displayed" (p. 8-4) for information regarding error messages.
•
Refer to the "Instruction Manual (Copy Operations)" provided with the FK-102 Type-A for
problems such as jamming of originals, paper jams, poor image quality or running out of
toner.
Check Points
Is the transmission procedure cor-
rect?
Is the FAX number of the remote sta-
tion being called correct? Are Pro-
gram dialing or abbreviated dialing
numbers registered correctly?
Is the telephone line setting correct?
Is the telephone line connected prop-
erly?
Is there a problem with the receiving
machine?
8-2
Corrective Actions
Check the transmission procedure and then try sending again.
Using Program dialing or abbreviated dialing, there may be an
error in registration of the FAX number. Try printing out the
Abbreviated Dialing List and check if the number is registered
correctly. Correct if there is an error in registration.
Does [Dialing method] of [Line Parameters] in the Key Operator
mode match the telephone line being used? Check the setting
and correct if there is an error.
Is the telephone line disconnected? Check the telephone line
connection and connect it if it is disconnected.
Is the power of the receiving facsimile turned off, is it out of
paper or is there another problem? Telephone the remote desti-
nation and check if there is a problem.