Connection to the control
5.5 Establishing a modem connection
5.5.3.5
Assigning parameters for the internal modem
Operating sequence
1. Select "Options" > "Administrate TS Adapter IE" in the "TeleService" software menu.
2. Assign the parameters for the internal modem as shown.
If you are using an external modem, you will have to make the appropriate settings there.
Figure 5-19
3. Enter the external access code which applies to you.
52
"Parameters" > "Modem" > "Internal modem" tab
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA