Siemens SINUMERIK 840D sl Operating Manual page 118

Operator control (software)
6.2 Project
6. If the file(s) is/are already on the control, then the "Prepare to copy" dialog opens. You are
prompted as to whether you want to overwrite the file. If you select "Yes", the file is
overwritten. If you select "Yes, all", all duplicate files are overwritten. If you select "No", the
file is not overwritten.
Figure 6-34
7. After these queries have been clarified, the copy dialog opens. The selected files are now
transferred to the control.
Figure 6-35
8. After the files have been successfully transferred to the control, they are displayed in the
lower area of the project dialog.
See also
Activating the alarm text files on the control using an HMI restart (Page 126)
118
Prepare copying
Copy
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA