Siemens SINUMERIK 840D sl Operating Manual page 129

6. Click the arrow pointing to the right.
Figure 6-47
7. Click "HMI restart".
8. Wait until the HMI has rebooted. The new texts then become effective.
See also
Transferring individual files from the project to the control system (Page 115)
Creating a project (OFFLINE) (Page 91)
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
HMI restart (e.g. SINUMERIK 840D sl / 828D)
Operator control (software)
6.2 Project
129