Connection to the control
5.5 Establishing a modem connection
4. Select "Options" > "Set TS Adapter IE IP Parameter...".
Figure 5-12
5. Compare the MAC address with the MAC address printed on the TS Adapter.
Note
If the MAC addresses are different, select "Options" > "Settings". Now select the appropriate
TS Adapter in the "Settings" dialog.
6. Make the settings shown in the "Setting parameters" figure.
Make sure the TS Adapter and the control system are in the same subnet.
7. Select "OK".
You will now administrate the TS Adapter IE.
See also
Administrating the TS Adapter (Page 45)
44
Setting parameters
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA